Direct shear strengthening of NSC and SCC using NSM CFRP and steel bars
Volume 7 , Issue 2 , June 2020 , Pages 31-47
Authors
Rozhno Omer Mustafa 1 ; Mohamed Raouf Abdul-Kadir 2
1 University of Sulaimani, College of Engineering, Civil Engineering Department
2 University of Sulaimani, College of Engineering, Civil Engineering Department
10.17656/sjes.10126
Keywords
Abstract
Failure in direct shear is sudden and catastrophic in concrete structures, Several techniques have been developed for shear strengthening of push-off specimens representing direct shear. In this research, the effectiveness of Near-surface mounted (NSM) FRP and steel bars as a strengthening technique for direct shear in normal strength concrete (NSC) and self-compacted concrete (SCC) are studied. As a result of the experimental work, it was observed that the NSM steel bars increased the shear capacity by 48 and 44% for both types of concrete NSC and SCC respectively, while the NSM CFRP rods increased the shear capacity by 30% and 33% for both NSC and SCC respectively. It was also observed that strengthening at 90° was more effective in terms of shear strength compared to 45° with a difference in the range of 8% for NSC and 5% for SCC. The analytical results are very close to the experimental ones.