Modeling and Practical Implementation of Separately Excited DC Motor Water Pump System

Volume 9 , Issue 3 , April 2023 , Pages 37-46

Authors

Rawaz Hama Aziz H. Karim 1 ; Alaa Abdulrahman 2

1 University of Sulaimani, College of Engineering, Electrical Engineering Department

2 University of Sulaimani, College of Engineering, Electrical Engineering Department

DOI logo 10.17656/sjes.10160

Keywords

Abstract


The requirement of using DC motor for driven water pump has gained more attention in the irrigation system due to high performance and wide range of speed control of DC motor and difficult improvement in physical behavior of water pump system. This paper studies on modeling and practical implementation of a separately excited DC motor (SEDCM) driven water pump system. The pump capacity and charge flow has been increased by manipulating shaft speed of the SEDCM using field weakening control. The mathematical model is derived for electro mechanical equations of motor as well as the pump equations. Three different tests have been carried out to prove the simulated model performances and validate the system response. For each particular test, the speed and armature current of the motor has been measured as well as the flow rate at constant pump head. Performance of the model has been compared with the practical implementation and they’re matched well.

Statistics
  • Article view365
  • Downloads7
  • Published at1 April 2023

  • RIS
  • BibTeX
  • EndNote
  • Mendeley
  • APA (7th edition)
  • MLA (9th edition)
  • Chicago
  • Harvard
  • IEEE
  • Vancouver